New Edwards Single Stage Single Head D-LAB 10-100 Diaphragm Vacuum Pump for Chemical Laboratories PN A48015941 The Edwards D-LAB 10-100 Diaphragm vacuum pump is especially made for chemistry laboratory operations and has a Pumping Speed of 10L min. and Ultimate Vacuum of 75 mbar at 60hz. These pumps are basically corrosion and solvent resistant since their parts in contact with the pumped medium are made of PTFE (Teflon), FFPM (Kalrez) and PVDF (Solef). The Edwards D-LAB vacuum pumps are corrosion-resistant to corrosive gas and liquids, unlike other common vacuum pumps, e.g., oil-sealed rotary vane vacuum pumps. The D-LAB diaphragm pumps are built on an oilless dry vacuum pumping technology which produces an oil-free vacuum. The D-LAB series vacuum pumps are commonly used in application, such as, rotary evaporators, drying chambers, filtration units, vacuum distillation configurations, gel drying, sublimation, evacuating desiccators, analysis preparation, stream sterilization, small sample freeze drying, and medical applications. These Edwards D-LAB series vacuum pumps are available in either single head stage or dual twin stage pumps. The ultimate pressure for the single stage pumps (models 10-100, 20-100, 34-100) is 75 Torr while the dual stage pumps (models 10-8, 20-8, 34-8) reach 6 Torr. The best pump for your application will best match your vacuum needs. If your application operating vacuum flow is higher and your base is not that import then choose the single-stage pumps. If you application does not have a constant flow of gas and you need the best possible vacuum pressure then choose the dual stage vacuum pumps. This Edwards 10-100 Single Stage, Single Head Diaphragm Vacuum Pumps have 0.6 m3h-1 and 10 lmin-1 Pumping Speed, and 75 Torr Ultimate Vacuum Pressure, G 1/8 intake & exhaust suitable for 10 mm hose and 115 VAC, 60 Hz. This pump is Brand New and ready for shipment. All accessories for this pump are available on this website. An Operating Instructions .PDF for the Edwards D-Lab Diaphragm Pumps can be downloaded to the side at Downloads.

New Edwards Single Stage Single Head D-LAB 20-100 Diaphragm Vacuum Pump for Chemical Laboratories PN A48017941 The Edwards D-LAB 20-100 Diaphragm vacuum pump is especially made for chemistry laboratory operations and has a Pumping Speed of 20L min. and Ultimate Vacuum of 75 mbar at 60hz. These pumps are basically corrosion and solvent resistant since their parts in contact with the pumped medium are made of PTFE (Teflon), FFPM (Kalrez) and PVDF (Solef). The Edwards D-LAB vacuum pumps are corrosion-resistant to corrosive gas and liquids, unlike other common vacuum pumps, e.g., oil-sealed rotary vane vacuum pumps. The D-LAB diaphragm pumps are built on an oilless dry vacuum pumping technology which produces an oil-free vacuum. The D-LAB series vacuum pumps are commonly used in application, such as, rotary evaporators, drying chambers, filtration units, vacuum distillation configurations, gel drying, sublimation, evacuating desiccators, analysis preparation, stream sterilization, small sample freeze drying, and medical applications. These Edwards D-LAB series vacuum pumps are available in either single head stage or dual twin stage pumps. The ultimate pressure for the single stage pumps (models 10-100, 20-100, 34-100) is 75 Torr while the dual stage pumps (models 10-8, 20-8, 34-8) reach 6 Torr. The best pump for your application will best match your vacuum needs. If your application operating vacuum flow is higher and your base is not that import then choose the single-stage pumps. If you application does not have a constant flow of gas and you need the best possible vacuum pressure then choose the dual stage vacuum pumps. This Edwards 20-100 Single Stage, Single Head Diaphragm Vacuum Pumps have 1.2 m3h-1 and 20 lmin-1 Pumping Speed, and 75 Torr Ultimate Vacuum Pressure, G 1/8 intake & exhaust suitable for 10 mm hose and 115 VAC, 60 Hz. This pump is Brand New and ready for shipment. All accessories for this pump are available on this website. An Operating Instructions .PDF for the Edwards D-Lab Diaphragm Pumps can be downloaded to the side at Downloads.

New Edwards Single Stage Single Head D-LAB 34-100 Diaphragm Vacuum Pump for Chemical Laboratories PN A48021941 The Edwards D-LAB 34 -100 Diaphragm vacuum pump is especially made for chemistry laboratory operations and has a Pumping Speed of 34L min. and Ultimate Vacuum of 75 mbar at 60hz. These pumps are basically corrosion and solvent resistant since their parts in contact with the pumped medium are made of PTFE (Teflon), FFPM (Kalrez) and PVDF (Solef). The Edwards D-LAB vacuum pumps are corrosion-resistant to corrosive gas and liquids, unlike other common vacuum pumps, e.g., oil-sealed rotary vane vacuum pumps. The D-LAB diaphragm pumps are built on an oilless dry vacuum pumping technology which produces an oil-free vacuum. The D-LAB series vacuum pumps are commonly used in application, such as, rotary evaporators, drying chambers, filtration units, vacuum distillation configurations, gel drying, sublimation, evacuating desiccators, analysis preparation, stream sterilization, small sample freeze drying, and medical applications. These Edwards D-LAB series vacuum pumps are available in either single head stage or dual twin stage pumps. The ultimate pressure for the single stage pumps (models 10-100, 20-100, 34-100) is 75 Torr while the dual stage pumps (models 10-8, 20-8, 34-8) reach 6 Torr. The best pump for your application will best match your vacuum needs. If your application operating vacuum flow is higher and your base is not that import then choose the single-stage pumps. If you application does not have a constant flow of gas and you need the best possible vacuum pressure then choose the dual stage vacuum pumps. This Edwards 34-100 Single Stage, Single Head Diaphragm Vacuum Pumps have 2.0 m3h-1 and 34 lmin-1 Pumping Speed, and 75 Torr Ultimate Vacuum Pressure, G 1/8 intake & exhaust suitable for 10 mm hose and 115 VAC, 60 Hz. This pump is Brand New and ready for shipment. All accessories for this pump are available on this website. An Operating Instructions .PDF for the Edwards D-Lab Diaphragm Pumps can be downloaded to the side at Downloads.

New Edwards Dual Stage Twin Head D-Lab 10-8 Diaphragm Vacuum Pump for Chemical Laboratories PN A48016941 The Edwards D-LAB 10-8 Diaphragm vacuum pump is especially made for chemistry laboratory operations and has a Pumping Speed of 10L min. and Ultimate Vacuum of 6 mbar at 60hz. These pumps are basically corrosion and solvent resistant since their parts in contact with the pumped medium are made of PTFE (Teflon), FFPM (Kalrez) and PVDF (Solef). The Edwards D-LAB vacuum pumps are corrosion-resistant to corrosive gas and liquids, unlike other common vacuum pumps, e.g., oil-sealed rotary vane vacuum pumps. The D-LAB diaphragm pumps are built on an oilless dry vacuum pumping technology which produces an oil-free vacuum. The D-LAB series vacuum pumps are commonly used in application, such as, rotary evaporators, drying chambers, filtration units, vacuum distillation configurations, gel drying, sublimation, evacuating desiccators, analysis preparation, stream sterilization, small sample freeze drying, and medical applications. These Edwards D-LAB series vacuum pumps are available in either single head stage or dual twin stage pumps. The ultimate pressure for the single stage pumps (models 10-100, 20-100, 34-100) is 75 Torr while the dual stage pumps (models 10-8, 20-8, 34-8) reach 6 Torr. The best pump for your application will best match your vacuum needs. If your application operating vacuum flow is higher and your base is not that import then choose the single-stage pumps. If you application does not have a constant flow of gas and you need the best possible vacuum pressure then choose the dual stage vacuum pumps. This Edwards 10-8 Dual Stage Twin Head D-Lab Diaphragm Vacuum Pumps have 0.6 m3h-1 and 10 lmin-1 Pumping Speed, and 6 Torr Ultimate Vacuum Pressure, G 1/8 intake & exhaust suitable for 10 mm hose and 115 VAC, 60 Hz. This pump is Brand New and ready for shipment. All accessories for this pump are available on this website. An Operating Instructions .PDF for the Edwards D-Lab Diaphragm Pumps can be downloaded to the side at Downloads.

Edwards XDD1 Diaphragm Vacuum Pump, 100-230 VAC, 1 phase. Edwards Part Number: A74602983. The Edwards XDD1 diaphragm vacuum pump has a pumping speed of 1.4 m3/hr, and an Ultimate Vaccum of <2 mbar. It can run on 100-230 VAC and has a single phase motor. The XDD1 is a compact and efficient pump, often used for backing small turbomolecular pumps in clean, high vacuum applications. It can also be used as a free standing bench top pump. A typical ultimate pressure of better than 5x10-8 mbar can be achieved when using an XDD1 to back a 70 l/s turbomolecular pump. XDD1 pumps are intended for use on non-aggressive, safe area applications. The XDD1 pump is also used to backup Edwards T-Station Turbo Systems. Under normal conditions the XDD1 is virtually maintenance free. The lifetime of the diaphragms and valves is typically > 10,000 operating hours, depending on the application. Another version of this pump is the Mk3 designed to be a part of a complete pumping package including an Edwards Turbo and Instrument Controller (TIC). The D.C. voltage motor on the Mk3 runs on 24 VDC via a 15 pin DIN connector. By selecting the appropriate mode the pump speed can be controlled by the user to provide variable pumping speed or max pumping speed. The Mk3 pump is compact and efficient. The Mk3 24V version can be user set to run at a maximum speed of 1.8 m3/hr at 2400 rpm.

New Edwards XDD1 Mk3 Diaphragm Vacuum Pump 24 VDC PN A74603991 This is the Mk3 24VDC XDD1 diaphragm pump. They have a Pumping Speed of 1.8 m3h-1 (set by user to 2400 rpm) and with Ultimate Vaccum of <2 mabr. They are compact and efficient pumps, used for backing small compound turbomolecular pumps in clean, high vacuum applications, and also designed to be free standing bench top units. The Mk3 24 VDC version are designed to provide a complete pumping package that can also be used with The Edwards Turbo and Instrument Controller (TIC). This D.C. voltage motor runs on 24 VDC via a 15 pin DIN connector. By selecting the appropriate mode the pump speed can be controlled by the user to provide variable pumping speed or max pumping speed. The XDD1 Mk3 24VDC version can now be user set to run at a maximum speed of 1.8 m3h-1 running at 2400 rpm. This pump is the XDD1 Mk3 24VDC Diaphragm Pump is Brand New and ready for shipment. All accessories for this pump are available on this website. Another version of this pump is the XDD1 110-230 VAC and is also used as a backing pump. The pump is fitted with a silencer which can be removed and an exhaust line connected with a 1/8 inch BSP fitting. An Operating Instructions .PDF for the XDD1 Diaphragm Pumps can be downloaded to the side at Downloads.