Skip to main content
× Home Services Products Catalogs Downloads TechSupport About Contact Careers (505) 872-0037

(505) 872-0037

Shopping Cart Icon
Cart
 
Login Icon
Login
Language Selector
en-us
×
Americas
Europe
Middle East & Africa
Asia Pacific & Japan
Agilent IDP-15 Dry Scroll Vacuum Pumps On Sale Agilent Varian Helium Leak Detectors On Sale Agilent TriScroll Pumps On Sale Pfeiffer ASM340 Leak Detectors On Sale Ideal Vacuum XG-120 Digital Thermocouple Gauges On Sale Edwards nXR Multi Stage Roots Pumps On Sale

Keyword       Part Number:      

× Vacuum Pumps Modular Vacuum Chambers Stainless Steel Vacuum Chambers Aluminum Vacuum Chambers ExploraVAC Unlimited Chambers ExploraVAC TVAC Test Chambers Fittings and Flanges Feedthroughs Vacuum Valves Rebuild Kits, Parts, And Motors Vacuum Fluids, Oils, and Greases Turbo Pumps And Controllers Filters Traps and Silencers Convection and Vacuum Ovens Leak Detection and RGA Vacuum Pressure Measurement Recirculating Chillers And Water Baths
×

Load

EVAC Chain Clamp for Converting Elastomer Seal NW16 KF16 to UHV Metal Seal
Out of Stock
Expecting 31
Anticipated Arrival 31 on 2024-05-10


EVAC Chain Clamp for Converting Elastomer (Viton/Buna) Seal NW16 KF16 to UHV (Ultra High Vacuum) Metal Seal This EVAC Chain Clamp for NW16 KF16 flanges is for converting Elastomer (Viton/Buna) rubber seals to UHV (Ultra High Vacuum) metal seals. This allows for a lower vacuum compared to elastomer (Viton/Buna) rubber seals. Other benefits include: reduced outgassing, no permeation , no hydrocarbons, and resistance to radiation and higher heat. The resultant UHV seal has a helium leak rate of of less than 1 X 10 -11 standard cc/sec. They can also be baked repeatedly to 150°C (302°F). The EVAC chain clamp and an aluminum knife edge seal form the UHV vacuum seal between the connecting KF flanges. (please see far right graphic above - click to enlarge). This is a uncoated version that is the preferred choice for sealing standard KF flanges with aluminum metal seals. This chain clamp has aluminum links. This is a KF16 NW16 chain clamp only, the aluminum knife edge seal IS NOT included but available on this website. For a complete explaination of this UHV Seal and dimensions of the chain clamp, download the EVAC Flange Brochure .pdf below. See Page 4.

Condition: New



Part Number: P103396



Price: $154.35



Currency: US Dollar (USD)

EVAC Chain Clamp for Converting Elastomer Seal NW25 KF25 to UHV Metal Seal
In Stock
13
Expecting 31
Anticipated Arrival 31 on 2024-04-19


EVAC Chain Clamp for Converting Elastomer (Viton/Buna) Seal NW25 KF25 to UHV (Ultra High Vacuum) Metal Seal This EVAC Chain Clamp for NW25 KF25 flanges is for converting Elastomer (Viton/Buna) rubber seals to UHV (Ultra High Vacuum) metal seals. This allows for a lower vacuum compared to elastomer (Viton/Buna) rubber seals. Other benefits include: reduced outgassing, no permeation , no hydrocarbons, and resistance to radiation and higher heat. The resultant UHV seal has a helium leak rate of of less than 1 X 10 -11 standard cc/sec. They can also be baked repeatedly to 150°C (302°F). The EVAC chain clamp and an aluminum knife edge seal form the UHV vacuum seal between the connecting KF flanges. (please see far right graphic above - click to enlarge). This is a uncoated version that is the preferred choice for sealing standard KF flanges with aluminum metal seals. This chain clamp has aluminum links. This is a KF25 NW25 chain clamp only, the aluminum knife edge seal IS NOT included but available on this website. For a complete explaination of this UHV Seal and dimensions of the chain clamp, download the EVAC FLange Brochure .pdf below. See page 4.

Condition: New



Part Number: P103397



Price: $175.56



Currency: US Dollar (USD)

EVAC Chain Clamp for Converting Elastomer Seal NW40 KF40 to UHV Metal Seal
In Stock
18
Expecting 22
Anticipated Arrival 22 on 2024-04-28


EVAC Chain Clamp for Converting Elastomer (Viton/Buna) Seal NW40 KF40 to UHV (Ultra High Vacuum) Metal SealThis EVAC Chain Clamp for NW40 KF40 flanges is for converting Elastomer (Viton/Buna) rubber seals to UHV (Ultra High Vacuum) metal seals. This allows for a lower vacuum compared to elastomer (Viton/Buna) rubber seals. Other benefits include: reduced outgassing, no permeation , no hydrocarbons, and resistance to radiation and higher heat. The resultant UHV seal has a helium leak rate of of less than 1 X 10 -11 standard cc/sec. They can also be baked repeatedly to 150°C (302°F). The EVAC chain clamp and an aluminum knife edge seal form the UHV vacuum seal between the connecting KF flanges. (please see far right graphic above - click to enlarge). This is a uncoated version that is the preferred choice for sealing standard KF flanges with aluminum metal seals. This chain clamp has aluminum links. This is a KF40 NW40 chain clamp only, the aluminum knife edge seal IS NOT included but available on this website. For a complete explaination of this UHV Seal and dimensions of the chain clamp, download the EVAC Flange Brochure .pdf below. See page 4.

Condition: New



Part Number: P103398



Price: $185.26




Currency: US Dollar (USD)

EVAC Chain Clamp for Converting Elastomer Seal NW50 KF50 to UHV Metal Seal
In Stock
7


EVAC Chain Clamp for Converting Elastomer (Viton/Buna) Seal NW50 KF50 to UHV (Ultra High Vacuum) Metal Seal This EVAC Chain Clamp for NW50 KF50 flanges is for converting Elastomer (Viton/Buna) rubber seals to UHV (Ultra High Vacuum) metal seals. This allows for a lower vacuum compared to elastomer (Viton/Buna) rubber seals. Other benefits include: reduced outgassing, no permeation , no hydrocarbons, and resistance to radiation and higher heat. The resultant UHV seal has a helium leak rate of of less than 1 X 10 -11 standard cc/sec. They can also be baked repeatedly to 150°C (302°F). The EVAC chain clamp and an aluminum knife edge seal form the UHV vacuum seal between the connecting KF flanges. (please see far right graphic above - click to enlarge). This is a uncoated version that is the preferred choice for sealing standard KF flanges with aluminum metal seals. This chain clamp has aluminum links. This is a KF50 NW50 chain clamp only, the aluminum knife edge seal IS NOT included but available on this website. For a complete explaination of this UHV Seal and dimensions of the chain clamp, download the EVAC Flange Brochure .pdf below. See page 4.

Condition: New



Part Number: P103399



Price: $207.12



Currency: US Dollar (USD)

EVAC Aluminum Metal Knife Edge OUTER Seal NW16 KF16 for UHV Seal PN NW-16-MS-A
In Stock
74
Expecting 60
Anticipated Arrival 60 on 2024-04-11


EVAC Aluminum metal OUTER seal for converting elastomer (Viton/Buna) rubber seal NW16 KF16 to UHV (Ultra High Vacuum) Seal - PN NW-16-MS-A This EVAC Aluminum Metal OUTER Seal NW16 KF16 flange is for converting Elastomer (Viton/Buna) rubber seals to UHV (Ultra High Vacuum) aluminum metal seals. This allows for a lower vacuum compared to elastomer (Viton/Buna) rubber seals. Other benefits include: reduced outgassing, no permeation , no hydrocarbons, and resistance to radiation and higher heat. The resultant UHV seal has a helium leak rate of less than 1 X 10 -11 standard cc/sec. They can also be baked repeatedly to 150°C (302°F). The EVAC chain clamp and an aluminum knife edge seal form the UHV vacuum seal between the connecting KF flanges. (please see far right graphic above - click to enlarge). This EVAC metal seal is made of aluminum. This is a KF16 NW16 aluminum metal knife edge seal only, the stainless steel chain clamp IS NOT included but available on this website. For a complete explaination of this UHV Seal and dimensions of the aluminum metal knife edge seal, download the EVAC Flange Brochure .pdf below.

Condition: New



Part Number: P103400



Price: $39.53



Currency: US Dollar (USD)

EVAC Aluminum Metal Knife Edge INNER Seal Centering Ring NW16 KF16 for UHV Seal
In Stock
27


EVAC Aluminum metal INNER seal for converting elastomer (Viton/Buna) rubber seal NW16 KF16 to UHV (Ultra High Vacuum) Seal - PN 34.016001.142.116-IZ This EVAC Aluminum Metal INNER Seal NW16 KF16 flange is for converting Elastomer (Viton/Buna) rubber seals to UHV (Ultra High Vacuum) aluminum metal seals. AN OUTER Seal can also be used. This allows for a lower vacuum compared to elastomer (Viton/Buna) rubber seals. Other benefits include: reduced outgassing, no permeation , no hydrocarbons, and resistance to radiation and higher heat. The resultant UHV seal has a helium leak rate of less than 1 X 10 -11 standard cc/sec. They can also be baked repeatedly to 150°C (302°F). The EVAC chain clamp and an aluminum knife edge INNER seal form the UHV vacuum seal between the connecting KF flanges. (please see far right graphic above - click to enlarge). This EVAC metal seal is made of aluminum. This is a KF16 NW16 aluminum metal knife edge INNER seal only, the stainless steel chain clamp IS NOT included but available on this website. For a complete explaination of this UHV Seal and dimensions of the aluminum metal knife edge seal, download the EVAC Flange Brochure .pdf to the side.

Condition: New



Part Number: P1011415



Price: $41.02



Currency: US Dollar (USD)

EVAC Aluminum Metal Knife Edge OUTER Seal NW25 KF25 for UHV Seal PN NW-25-MS-A
In Stock
108


EVAC Aluminum metal OUTER seal for converting elastomer (Viton/Buna) rubber seal NW25 KF25 to UHV (Ultra High Vacuum) Seal - PN NW-25-MS-A This EVAC Aluminum Metal OUTER Seal NW25 KF25 flange is for converting Elastomer (Viton/Buna) rubber seals to UHV (Ultra High Vacuum) aluminum metal seals. This allows for a lower vacuum compared to elastomer (Viton/Buna) rubber seals. Other benefits include: reduced outgassing, no permeation , no hydrocarbons, and resistance to radiation and higher heat. The resultant UHV seal has a helium leak rate of less than 1 X 10 -11 standard cc/sec. They can also be baked repeatedly to 150°C (302°F). The EVAC chain clamp and an aluminum knife edge seal form the UHV vacuum seal between the connecting KF flanges. (please see far right graphic above - click to enlarge). This EVAC metal seal is made of aluminum. This is a KF25 NW25 aluminum metal knife edge seal only, the stainless steel chain clamp IS NOT included but available on this website. For a complete explaination of this UHV Seal and dimensions of the aluminum metal knife edge seal, download the EVAC Flange Brochure .pdf below.

Condition: New



Part Number: P103401



Price: $105.47



Currency: US Dollar (USD)

EVAC Aluminum Metal Knife Edge OUTER Seal NW40 KF40 for UHV Seal PN NW-40-MS-A
In Stock
122


EVAC Aluminum metal OUTER seal for converting elastomer (Viton/Buna) rubber seal NW40 KF40 to UHV (Ultra High Vacuum) Seal - PN NW-40-MS-A This EVAC Aluminum Metal OUTER Seal NW40 KF40 flange is for converting Elastomer (Viton/Buna) rubber seals to UHV (Ultra High Vacuum) aluminum metal seals. This allows for a lower vacuum compared to elastomer (Viton/Buna) rubber seals. Other benefits include: reduced outgassing, no permeation , no hydrocarbons, and resistance to radiation and higher heat. The resultant UHV seal has a helium leak rate of less than 1 X 10 -11 standard cc/sec. They can also be baked repeatedly to 150°C (302°F). The EVAC chain clamp and an aluminum knife edge seal form the UHV vacuum seal between the connecting KF flanges. (please see far right graphic above - click to enlarge). This EVAC metal seal is made of aluminum. This is a KF40 NW40 aluminum metal knife edge seal only, the stainless steel chain clamp IS NOT included but available on this website. For a complete explaination of this UHV Seal and dimensions of the aluminum metal knife edge seal, download the EVAC Flange Brochure .pdf below.

Condition: New



Part Number: P103402



Price: $69.58



Currency: US Dollar (USD)

EVAC Aluminum Metal Knife Edge OUTER Seal NW50 KF50 for UHV Seal PN NW-50-MS-A
In Stock
52


EVAC Aluminum metal OUTER seal for converting elastomer (Viton/Buna) rubber seal NW50 KF50 to UHV (Ultra High Vacuum) Seal - PN NW-50-MS-A This EVAC Aluminum Metal OUTER Seal NW50 KF50 flange is for converting Elastomer (Viton/Buna) rubber seals to UHV (Ultra High Vacuum) aluminum metal seals. This allows for a lower vacuum compared to elastomer (Viton/Buna) rubber seals. Other benefits include: reduced outgassing, no permeation , no hydrocarbons, and resistance to radiation and higher heat. The resultant UHV seal has a helium leak rate of less than 1 X 10 -11 standard cc/sec. They can also be baked repeatedly to 150°C (302°F). The EVAC chain clamp and an aluminum knife edge seal form the UHV vacuum seal between the connecting KF flanges. (please see far right graphic above - click to enlarge). This EVAC metal seal is made of aluminum. This is a KF50 NW50 aluminum metal knife edge seal only, the stainless steel chain clamp IS NOT included but available on this website. For a complete explaination of this UHV Seal and dimensions of the aluminum metal knife edge seal, download the EVAC Flange Brochure .pdf below.

Condition: New



Part Number: P103403



Price: $63.86



Currency: US Dollar (USD)
Marca de agua con el logotipo de Ideal Vacuum
CONTACT US
Ideal Vacuum Products , LLC
5910 Midway Park Blvd NE
Albuquerque, New Mexico 87109-5805 USA

Phone: (505) 872-0037
Fax: (505) 872-9001
info@idealvac.com