Skip to main content
× Home Services Products Catalogs Downloads TechSupport About Contact Careers (505) 872-0037

(505) 872-0037

Shopping Cart Icon
Cart
 
Login Icon
Login
Language Selector
en-us
×
Americas
Europe
Middle East & Africa
Asia Pacific & Japan
Pfeiffer ASM340 Leak Detectors On Sale Ideal Vacuum XG-110 Portable Digital Thermocouple Controllers On Sale Edwards nEXT300D TStations On Sale Agilent IDP-15 Dry Scroll Vacuum Pumps On Sale Ideal Vacuum XG-120 Digital Thermocouple Gauges On Sale Agilent TriScroll Pumps On Sale

Keyword       Part Number:      

× Vacuum Pumps Modular Vacuum Chambers Stainless Steel Vacuum Chambers Aluminum Vacuum Chambers ExploraVAC Unlimited Chambers ExploraVAC TVAC Test Chambers Fittings and Flanges Feedthroughs Vacuum Valves Rebuild Kits, Parts, And Motors Vacuum Fluids, Oils, and Greases Turbo Pumps And Controllers Filters Traps and Silencers Convection and Vacuum Ovens Leak Detection and RGA Vacuum Pressure Measurement Recirculating Chillers And Water Baths
×

Load

Agilent Varian HS-32 Diffusion Pump With Standard Cold Cap, Inlet 32 in. ASA, 240VAC, PN F6134308
Out of Stock


Agilent Varian HS-32 Diffusion Pump With Standard Cold Cap Inlet flange 32 in. ASA, foreline flange 6 in. ASA, 3 Phase, 240 VAC.Maximum Pumping Speed of 32,000 l/s AirThese Varian Agilent High Throughput models include the series HS-16, HS-20, HS-32 and NHS-35. This is the HS-32 diffusion high throughput vacuum pump. They are the primary industrial standard for high vacuum pumping mechanism. The Agilent Varian HS-32 diffusion pumps have a high pumping speed for all gases and low cost per unit pumping speed when compared with other types of pump used in the same vacuum range. The full fractionating design allows vaporized fluid to be fractionated in the boiler and jet assembly. Contamination and decomposition products are pumped away and only the purest vapor reaches the top jet, assuring highest speed and lowest backstreaming. The vacuum fluid heater is mounted at the bottom of the pump body. The HS pumps have a fill and drain assembly for easy maintenance of pump fluid and continuous monitoring with thermal protection switches. Finned boilers increase the surface area which prolongs fluid life. The inlet is at the top, and the exhaust is through the foreline.Diffusion pumps use a high-speed jet of vapor to direct gas molecules in the pump throat down into the bottom of the pump and out the exhaust. The oil diffusion pump is operated with an oil that has low vapor pressure. Its purpose is to achieve higher vacuum (lower pressure) than possible by use of positive displacement pumps alone. Although its use has been mainly associated within the high vacuum range (down to 10-9 Torr), diffusion pumps today can produce pressures approaching 10-10 Torr when properly used with modern fluids and accessories. The features that make the diffusion pump attractive for high and ultra-high vacuum use are its high pumping speed for all gases and low cost per unit pumping speed when compared with other types of pump used in the same vacuum range. Diffusion pumps cannot discharge directly into the atmosphere, so a mechanical forepump is typically used to maintain an outlet pressure around 1 mTorr. These Varian model HS-32 high vacuum, high throughput diffusion pumps are new and can be ordered with either a 3-phase 240, 415 or 480 VAC heaters. When ordering please specify which voltage your application will require. We stock and sell diffusion pumps oils, along with vacuum fittings, adapters, and replacement parts for your Agilent Varian HS-32 diffusion pumps. This pump uses IVP 704 diffusion pump fluid and is designed for high vacuum and fast pumping of large volumes of gas or vapor in production operations. For HS-32 Instruction Manual scroll down to manuals tab AVAILABLE DOWNLOADS: and download the .pdf. Highlights For This Agilent Varian HS-32 Diffusion Pump ASA 32 in. Inlet Flange, OD 38.12 in., ID 32.06 in., (16 bolt holes) hole size 0.87 in. ASA 6 in. Outlet Flange, OD 11 in., ID 6.73 in., (8 bolt holes) hole size 0.88 in. Standard Cold Cap Maximum Pumping Speed 32,000 l/s air, 40,000 l/s He and H2 240 VAC @ 4000 Watt Heater (6 required) Weight 1500 lbs. (680Kg) Height 69 in. (1740mm) Designed To Be Used With IVP 704 Diffusion Pump Oil (3 U.S. Gallons)

Condition: New



Part Number: P107049



Price: $34,915.45


Regular Price: $41,077.00




Currency: US Dollar (USD)

Agilent Varian HS-32 Diffusion Pump With HALO Baffle Cold Cap, Inlet 32 in. ASA, 240VAC, 76134318
Out of Stock


Agilent Varian HS-32 Diffusion Pump With Halo Baffle Cold Cap Inlet flange 32 in. ASA, foreline flange 6 in. ASA, 3 Phase, 240 VAC.Maximum Pumping Speed of 17,300 l/s Air, 21,625 l/s Helium These Varian Agilent High Throughput models include the series HS-16, HS-20, HS-32 and NHS-35. This is the HS-32 diffusion high throughput vacuum pump. They are the primary industrial standard for high vacuum pumping mechanism. The Agilent Varian HS-32 diffusion pumps have a high pumping speed for all gases and low cost per unit pumping speed when compared with other types of pump used in the same vacuum range. The full fractionating design allows vaporized fluid to be fractionated in the boiler and jet assembly. Contamination and decomposition products are pumped away and only the purest vapor reaches the top jet, assuring highest speed and lowest backstreaming. The vacuum fluid heater is mounted at the bottom of the pump body. The HS pumps have a fill and drain assembly for easy maintenance of pump fluid and continuous monitoring with thermal protection switches. Finned boilers increase the surface area which prolongs fluid life. The inlet is at the top, and the exhaust is through the foreline. The Halo Baffle stops backstreaming as effectively as an optically dense baffle, yet it retains 60% of the pump’s speed.Diffusion pumps use a high-speed jet of vapor to direct gas molecules in the pump throat down into the bottom of the pump and out the exhaust. The oil diffusion pump is operated with an oil that has low vapor pressure. Its purpose is to achieve higher vacuum (lower pressure) than possible by use of positive displacement pumps alone. Although its use has been mainly associated within the high vacuum range (down to 10-9 Torr), diffusion pumps today can produce pressures approaching 10-10 Torr when properly used with modern fluids and accessories. The features that make the diffusion pump attractive for high and ultra-high vacuum use are its high pumping speed for all gases and low cost per unit pumping speed when compared with other types of pump used in the same vacuum range. Diffusion pumps cannot discharge directly into the atmosphere, so a mechanical forepump is typically used to maintain an outlet pressure around 1 mTorr. These Varian model HS-32 high vacuum, high throughput diffusion pumps are new and can be ordered with either a 3-phase 240, 415 or 480 VAC heaters. When ordering please specify which voltage your application will require. We stock and sell diffusion pumps oils, along with vacuum fittings, adapters, and replacement parts for your Agilent Varian HS-32 diffusion pumps. This pump uses IVP 704 diffusion pump fluid and is designed for high vacuum and fast pumping of large volumes of gas or vapor in production operations. For HS-32 Instruction Manual scroll down to manuals tab AVAILABLE DOWNLOADS: and download the .pdf. Highlights For This Agilent Varian HS-32 Diffusion Pump ASA 32 in. Inlet Flange, OD 38.12 in., ID 32.06 in., (16 bolt holes) hole size 0.87 in. ASA 6 in. Outlet Flange, OD 11 in., ID 6.73 in., (8 bolt holes) hole size 0.88 in. HALO Baffle Cold Cap Maximum Pumping Speed 17,300 l/s Air, 21,625 l/s Helium, 240 VAC @ 4000 Watt Heater (6 required) Weight 1500 lbs. (680Kg) Height 69 in. (1740mm) Designed To Be Used With IVP 704 Diffusion Pump Oil (3 U.S. Gallons)

Condition: New



Part Number: P107052



Price: $37,310.75


Regular Price: $43,895.00




Currency: US Dollar (USD)

Agilent Varian HS-32 Diffusion Pump With Standard Cold Cap, Inlet 32 in. ASA, 415VAC, PN 76134326
Out of Stock


Agilent Varian HS-32 Diffusion Pump With Standard Cold Cap Inlet flange 32 in. ASA, foreline flange 6 in. ASA, 3 Phase, 415 VAC.Maximum Pumping Speed of 32,000 l/s Air These Varian Agilent High Throughput models include the series HS-16, HS-20, HS-32 and NHS-35. This is the HS-32 diffusion high throughput vacuum pump. They are the primary industrial standard for high vacuum pumping mechanism. The Agilent Varian HS-32 diffusion pumps have a high pumping speed for all gases and low cost per unit pumping speed when compared with other types of pump used in the same vacuum range. The full fractionating design allows vaporized fluid to be fractionated in the boiler and jet assembly. Contamination and decomposition products are pumped away and only the purest vapor reaches the top jet, assuring highest speed and lowest backstreaming. The vacuum fluid heater is mounted at the bottom of the pump body. The HS pumps have a fill and drain assembly for easy maintenance of pump fluid and continuous monitoring with thermal protection switches. Finned boilers increase the surface area which prolongs fluid life. The inlet is at the top, and the exhaust is through the foreline.Diffusion pumps use a high-speed jet of vapor to direct gas molecules in the pump throat down into the bottom of the pump and out the exhaust. The oil diffusion pump is operated with an oil that has low vapor pressure. Its purpose is to achieve higher vacuum (lower pressure) than possible by use of positive displacement pumps alone. Although its use has been mainly associated within the high vacuum range (down to 10-9 Torr), diffusion pumps today can produce pressures approaching 10-10 Torr when properly used with modern fluids and accessories. The features that make the diffusion pump attractive for high and ultra-high vacuum use are its high pumping speed for all gases and low cost per unit pumping speed when compared with other types of pump used in the same vacuum range. Diffusion pumps cannot discharge directly into the atmosphere, so a mechanical forepump is typically used to maintain an outlet pressure around 1 mTorr. These Varian model HS-32 high vacuum, high throughput diffusion pumps are new and can be ordered with either a 3-phase 240, 415 or 480 VAC heaters. When ordering please specify which voltage your application will require. We stock and sell diffusion pumps oils, along with vacuum fittings, adapters, and replacement parts for your Agilent Varian HS-32 diffusion pumps. This pump uses IVP 704 diffusion pump fluid and is designed for high vacuum and fast pumping of large volumes of gas or vapor in production operations. For HS-32 Instruction Manual scroll down to manuals tab AVAILABLE DOWNLOADS: and download the .pdf. Highlights For This Agilent Varian HS-32 Diffusion Pump ASA 32 in. Inlet Flange, OD 38.12 in., ID 32.06 in., (16 bolt holes) hole size 0.87 in. ASA 6 in. Outlet Flange, OD 11 in., ID 6.73 in., (8 bolt holes) hole size 0.88 in. Standard Cold Cap Maximum Pumping Speed 32,000 l/s air, 40,000 l/s He and H2 415 VAC @ 4000 Watt Heater (6 required) Weight 1500 lbs. (680Kg) Height 69 in. (1740mm) Designed To Be Used With IVP 704 Diffusion Pump Oil (3 U.S. Gallons)

Condition: New



Part Number: P107050



Price: $40,479.04


Regular Price: $47,622.40




Currency: US Dollar (USD)

Agilent Varian HS-32 Diffusion Pump With HALO Baffle Cold Cap, Inlet 32 in. ASA, 415VAC, 76134336
Out of Stock


Agilent Varian HS-32 Diffusion Pump With Halo Baffle Cold Cap Inlet flange 32 in. ASA, foreline flange 6 in. ASA, 3 Phase, 415 VAC.Maximum Pumping Speed of 17,300 l/s Air, 21,625 l/s Helium These Varian Agilent High Throughput models include the series HS-16, HS-20, HS-32 and NHS-35. This is the HS-32 diffusion high throughput vacuum pump. They are the primary industrial standard for high vacuum pumping mechanism. The Agilent Varian HS-32 diffusion pumps have a high pumping speed for all gases and low cost per unit pumping speed when compared with other types of pump used in the same vacuum range. The full fractionating design allows vaporized fluid to be fractionated in the boiler and jet assembly. Contamination and decomposition products are pumped away and only the purest vapor reaches the top jet, assuring highest speed and lowest backstreaming. The vacuum fluid heater is mounted at the bottom of the pump body. The HS pumps have a fill and drain assembly for easy maintenance of pump fluid and continuous monitoring with thermal protection switches. Finned boilers increase the surface area which prolongs fluid life. The inlet is at the top, and the exhaust is through the foreline. The Halo Baffle stops backstreaming as effectively as an optically dense baffle, yet it retains 60% of the pump’s speed.Diffusion pumps use a high-speed jet of vapor to direct gas molecules in the pump throat down into the bottom of the pump and out the exhaust. The oil diffusion pump is operated with an oil that has low vapor pressure. Its purpose is to achieve higher vacuum (lower pressure) than possible by use of positive displacement pumps alone. Although its use has been mainly associated within the high vacuum range (down to 10-9 Torr), diffusion pumps today can produce pressures approaching 10-10 Torr when properly used with modern fluids and accessories. The features that make the diffusion pump attractive for high and ultra-high vacuum use are its high pumping speed for all gases and low cost per unit pumping speed when compared with other types of pump used in the same vacuum range. Diffusion pumps cannot discharge directly into the atmosphere, so a mechanical forepump is typically used to maintain an outlet pressure around 1 mTorr. These Varian model HS-32 high vacuum, high throughput diffusion pumps are new and can be ordered with either a 3-phase 240, 415 or 480 VAC heaters. When ordering please specify which voltage your application will require. We stock and sell diffusion pumps oils, along with vacuum fittings, adapters, and replacement parts for your Agilent Varian HS-32 diffusion pumps. This pump uses IVP 704 diffusion pump fluid and is designed for high vacuum and fast pumping of large volumes of gas or vapor in production operations. For HS-32 Instruction Manual scroll down to manuals tab AVAILABLE DOWNLOADS: and download the .pdf. Highlights For This Agilent Varian HS-32 Diffusion Pump ASA 32 in. Inlet Flange, OD 38.12 in., ID 32.06 in., (16 bolt holes) hole size 0.87 in. ASA 6 in. Outlet Flange, OD 11 in., ID 6.73 in., (8 bolt holes) hole size 0.88 in. HALO Baffle Cold Cap Maximum Pumping Speed 17,300 l/s Air, 21,625 l/s Helium 415 VAC @ 4000 Watt Heater (6 required) Weight 1500 lbs. (680Kg) Height 69 in. (1740mm) Designed To Be Used With IVP 704 Diffusion Pump Oil (3 U.S. Gallons)

Condition: New



Part Number: P107053



Price: $42,874.34


Regular Price: $50,440.40




Currency: US Dollar (USD)

Agilent Varian HS-32 Diffusion Pump With Standard Cold Cap, Inlet 32 in. ASA, 480VAC, PN 76134309
Out of Stock


Agilent Varian HS-32 Diffusion Pump With Standard Cold Cap Inlet flange 32 in. ASA, foreline flange 6 in. ASA, 3 Phase, 480 VAC.Maximum Pumping Speed of 32,000 l/s Air These Varian Agilent High Throughput models include the series HS-16, HS-20, HS-32 and NHS-35. This is the HS-32 diffusion high throughput vacuum pump. They are the primary industrial standard for high vacuum pumping mechanism. The Agilent Varian HS-32 diffusion pumps have a high pumping speed for all gases and low cost per unit pumping speed when compared with other types of pump used in the same vacuum range. The full fractionating design allows vaporized fluid to be fractionated in the boiler and jet assembly. Contamination and decomposition products are pumped away and only the purest vapor reaches the top jet, assuring highest speed and lowest backstreaming. The vacuum fluid heater is mounted at the bottom of the pump body. The HS pumps have a fill and drain assembly for easy maintenance of pump fluid and continuous monitoring with thermal protection switches. Finned boilers increase the surface area which prolongs fluid life. The inlet is at the top, and the exhaust is through the foreline.Diffusion pumps use a high-speed jet of vapor to direct gas molecules in the pump throat down into the bottom of the pump and out the exhaust. The oil diffusion pump is operated with an oil that has low vapor pressure. Its purpose is to achieve higher vacuum (lower pressure) than possible by use of positive displacement pumps alone. Although its use has been mainly associated within the high vacuum range (down to 10-9 Torr), diffusion pumps today can produce pressures approaching 10-10 Torr when properly used with modern fluids and accessories. The features that make the diffusion pump attractive for high and ultra-high vacuum use are its high pumping speed for all gases and low cost per unit pumping speed when compared with other types of pump used in the same vacuum range. Diffusion pumps cannot discharge directly into the atmosphere, so a mechanical forepump is typically used to maintain an outlet pressure around 1 mTorr. These Varian model HS-32 high vacuum, high throughput diffusion pumps are new and can be ordered with either a 3-phase 240, 415 or 480 VAC heaters. When ordering please specify which voltage your application will require. We stock and sell diffusion pumps oils, along with vacuum fittings, adapters, and replacement parts for your Agilent Varian HS-32 diffusion pumps. This pump uses IVP 704 diffusion pump fluid and is designed for high vacuum and fast pumping of large volumes of gas or vapor in production operations. For HS-32 Instruction Manual scroll down to manuals tab AVAILABLE DOWNLOADS: and download the .pdf. Highlights For This Agilent Varian HS-32 Diffusion Pump ASA 32 in. Inlet Flange, OD 38.12 in., ID 32.06 in., (16 bolt holes) hole size 0.87 in. ASA 6 in. Outlet Flange, OD 11 in., ID 6.73 in., (8 bolt holes) hole size 0.88 in. Standard Cold Cap Maximum Pumping Speed 32,000 l/s air, 40,000 l/s He and H2 480 VAC @ 4000 Watt Heater (6 required) Weight 1500 lbs. (680Kg) Height 69 in. (1740mm) Designed To Be Used With IVP 704 Diffusion Pump Oil (3 U.S. Gallons)

Condition: New



Part Number: P107051



Price: $40,479.04


Regular Price: $47,622.40




Currency: US Dollar (USD)

Agilent Varian HS-32 Diffusion Pump With HALO Baffle Cold Cap, Inlet 32 in. ASA, 480VAC, 76134319
Out of Stock


Agilent Varian HS-32 Diffusion Pump With Halo Baffle Cold Cap Inlet flange 32 in. ASA, foreline flange 6 in. ASA, 3 Phase, 480 VAC.Maximum Pumping Speed of 17,300 l/s Air, 21,625 l/s Helium These Varian Agilent High Throughput models include the series HS-16, HS-20, HS-32 and NHS-35. This is the HS-32 diffusion high throughput vacuum pump. They are the primary industrial standard for high vacuum pumping mechanism. The Agilent Varian HS-32 diffusion pumps have a high pumping speed for all gases and low cost per unit pumping speed when compared with other types of pump used in the same vacuum range. The full fractionating design allows vaporized fluid to be fractionated in the boiler and jet assembly. Contamination and decomposition products are pumped away and only the purest vapor reaches the top jet, assuring highest speed and lowest backstreaming. The vacuum fluid heater is mounted at the bottom of the pump body. The HS pumps have a fill and drain assembly for easy maintenance of pump fluid and continuous monitoring with thermal protection switches. Finned boilers increase the surface area which prolongs fluid life. The inlet is at the top, and the exhaust is through the foreline. The Halo Baffle stops backstreaming as effectively as an optically dense baffle, yet it retains 60% of the pump’s speed.Diffusion pumps use a high-speed jet of vapor to direct gas molecules in the pump throat down into the bottom of the pump and out the exhaust. The oil diffusion pump is operated with an oil that has low vapor pressure. Its purpose is to achieve higher vacuum (lower pressure) than possible by use of positive displacement pumps alone. Although its use has been mainly associated within the high vacuum range (down to 10-9 Torr), diffusion pumps today can produce pressures approaching 10-10 Torr when properly used with modern fluids and accessories. The features that make the diffusion pump attractive for high and ultra-high vacuum use are its high pumping speed for all gases and low cost per unit pumping speed when compared with other types of pump used in the same vacuum range. Diffusion pumps cannot discharge directly into the atmosphere, so a mechanical forepump is typically used to maintain an outlet pressure around 1 mTorr. These Varian model HS-32 high vacuum, high throughput diffusion pumps are new and can be ordered with either a 3-phase 240, 415 or 480 VAC heaters. When ordering please specify which voltage your application will require. We stock and sell diffusion pumps oils, along with vacuum fittings, adapters, and replacement parts for your Agilent Varian HS-32 diffusion pumps. This pump uses IVP 704 diffusion pump fluid and is designed for high vacuum and fast pumping of large volumes of gas or vapor in production operations. For HS-32 Instruction Manual scroll down to manuals tab AVAILABLE DOWNLOADS: and download the .pdf. Highlights For This Agilent Varian HS-32 Diffusion Pump ASA 32 in. Inlet Flange, OD 38.12 in., ID 32.06 in., (16 bolt holes) hole size 0.87 in. ASA 6 in. Outlet Flange, OD 11 in., ID 6.73 in., (8 bolt holes) hole size 0.88 in. HALO Baffle Cold Cap Maximum Pumping Speed 17,300 l/s Air, 21,625 l/s Helium 480 VAC @ 4000 Watt Heater (6 required) Weight 1500 lbs. (680Kg) Height 69 in. (1740mm) Designed To Be Used With IVP 704 Diffusion Pump Oil (3 U.S. Gallons)

Condition: New



Part Number: P107054



Price: $42,874.34


Regular Price: $50,440.40




Currency: US Dollar (USD)

Agilent Varian HS-32 Diffusion Pump With Standard Cold Cap, Inlet ISO 800F, 240VAC, PN L5923308
Out of Stock


Agilent Varian HS-32 Diffusion Pump With Standard Cold Cap Inlet flange ISO 800F, Foreline flange ISO 200K, 3 Phase, 240 VAC.Maximum Pumping Speed of 17,300 l/s Air, Agilent Varian These Varian Agilent High Throughput models include the series HS-16, HS-20, HS-32 and NHS-35. This is the HS-32 diffusion high throughput vacuum pump. They are the primary industrial standard for high vacuum pumping mechanism. The Agilent Varian HS-32 diffusion pumps have a high pumping speed for all gases and low cost per unit pumping speed when compared with other types of pump used in the same vacuum range. The full fractionating design allows vaporized fluid to be fractionated in the boiler and jet assembly. Contamination and decomposition products are pumped away and only the purest vapor reaches the top jet, assuring highest speed and lowest backstreaming. The vacuum fluid heater is mounted at the bottom of the pump body. The HS pumps have a fill and drain assembly for easy maintenance of pump fluid and continuous monitoring with thermal protection switches. Finned boilers increase the surface area which prolongs fluid life. The inlet is at the top, and the exhaust is through the foreline.Diffusion pumps use a high-speed jet of vapor to direct gas molecules in the pump throat down into the bottom of the pump and out the exhaust. The oil diffusion pump is operated with an oil that has low vapor pressure. Its purpose is to achieve higher vacuum (lower pressure) than possible by use of positive displacement pumps alone. Although its use has been mainly associated within the high vacuum range (down to 10-9 Torr), diffusion pumps today can produce pressures approaching 10-10 Torr when properly used with modern fluids and accessories. The features that make the diffusion pump attractive for high and ultra-high vacuum use are its high pumping speed for all gases and low cost per unit pumping speed when compared with other types of pump used in the same vacuum range. Diffusion pumps cannot discharge directly into the atmosphere, so a mechanical forepump is typically used to maintain an outlet pressure around 1 mTorr. These Varian model HS-32 high vacuum, high throughput diffusion pumps are new and can be ordered with either a 3-phase 240, 415 or 480 VAC heaters. When ordering please specify which voltage your application will require. We stock and sell diffusion pumps oils, along with vacuum fittings, adapters, and replacement parts for your Agilent Varian HS-32 diffusion pumps. This pump uses IVP 704 diffusion pump fluid and is designed for high vacuum and fast pumping of large volumes of gas or vapor in production operations. For HS-32 Instruction Manual scroll down to manuals tab AVAILABLE DOWNLOADS: and download the .pdf. Highlights For This Agilent Varian HS-32 Diffusion Pump ISO 800F Inlet Flange, OD 36.22 in., ID 32.06 in., (24 bolt holes) hole size 0.55 in. ISO 200K Outlet Flange OD 9.45 in., ID 6.73 in., (8-12 claw clamps) Standard Cold Cap Maximum Pumping Speed 17,300 l/s air, 21,625 l/s He and H2 240 VAC @ 4000 Watt Heater (6 required) Weight 1500 lbs. (680Kg) Height 69 in. (1740mm) Designed To Be Used With IVP 704 Diffusion Pump Oil (3 U.S. Gallons)

Condition: New



Part Number: P107055



Price: $34,915.45


Regular Price: $41,077.00




Currency: US Dollar (USD)

Agilent Varian HS-32 Diffusion Pump HALO Baffle Cold Cap, Inlet ISO 800F, 240VAC
Out of Stock


Agilent Varian HS-32 Diffusion Pump With HALO Baffle Cold Cap Inlet flange ISO 800F, Foreline flange ISO 200K, 3 Phase, 240 VAC.Maximum Pumping Speed of 17,300 l/s Air, 21,625 l/s Helium, Agilent Varian These Varian Agilent High Throughput models include the series HS-16, HS-20, HS-32 and NHS-35. This is the HS-32 diffusion high throughput vacuum pump. They are the primary industrial standard for high vacuum pumping mechanism. The Agilent Varian HS-32 diffusion pumps have a high pumping speed for all gases and low cost per unit pumping speed when compared with other types of pump used in the same vacuum range. The full fractionating design allows vaporized fluid to be fractionated in the boiler and jet assembly. Contamination and decomposition products are pumped away and only the purest vapor reaches the top jet, assuring highest speed and lowest backstreaming. The vacuum fluid heater is mounted at the bottom of the pump body. The HS pumps have a fill and drain assembly for easy maintenance of pump fluid and continuous monitoring with thermal protection switches. Finned boilers increase the surface area which prolongs fluid life. The inlet is at the top, and the exhaust is through the foreline. The Halo Baffle stops backstreaming as effectively as an optically dense baffle, yet it retains 60% of the pump’s speed.Diffusion pumps use a high-speed jet of vapor to direct gas molecules in the pump throat down into the bottom of the pump and out the exhaust. The oil diffusion pump is operated with an oil that has low vapor pressure. Its purpose is to achieve higher vacuum (lower pressure) than possible by use of positive displacement pumps alone. Although its use has been mainly associated within the high vacuum range (down to 10-9 Torr), diffusion pumps today can produce pressures approaching 10-10 Torr when properly used with modern fluids and accessories. The features that make the diffusion pump attractive for high and ultra-high vacuum use are its high pumping speed for all gases and low cost per unit pumping speed when compared with other types of pump used in the same vacuum range. Diffusion pumps cannot discharge directly into the atmosphere, so a mechanical forepump is typically used to maintain an outlet pressure around 1 mTorr. These Varian model HS-32 high vacuum, high throughput diffusion pumps are new and can be ordered with either a 3-phase 240, 415 or 480 VAC heaters. When ordering please specify which voltage your application will require. We stock and sell diffusion pumps oils, along with vacuum fittings, adapters, and replacement parts for your Agilent Varian HS-32 diffusion pumps. This pump uses IVP 704 diffusion pump fluid and is designed for high vacuum and fast pumping of large volumes of gas or vapor in production operations. For HS-32 Instruction Manual scroll down to manuals tab AVAILABLE DOWNLOADS: and download the .pdf. Highlights For This Agilent Varian HS-32 Diffusion Pump ISO 800F Inlet Flange, OD 36.22 in., ID 32.06 in., (24 bolt holes) hole size 0.55 in. ISO 200K Outlet Flange OD 9.45 in., ID 6.73 in., (8-12 claw clamps) HALO Baffle Cold Cap Maximum Pumping Speed 17,300 l/s Air, 21,625 l/s Helium, 240 VAC @ 4000 Watt Heater (6 required) Weight 1500 lbs. (680Kg) Height 69 in. (1740mm) Designed To Be Used With IVP 704 Diffusion Pump Oil (3 U.S. Gallons)

Condition: New



Part Number: P107058



Price: $37,310.75


Regular Price: $43,895.00




Currency: US Dollar (USD)

Agilent Varian HS-32 Diffusion Pump With Standard Cold Cap, Inlet ISO 800F, 415VAC
Out of Stock


Agilent Varian HS-32 Diffusion Pump With Standard Cold Cap Inlet flange ISO 800F, Foreline flange ISO 200K, 3 Phase, 415 VAC.Maximum Pumping Speed of 17,300 l/s Air, Agilent Varian These Varian Agilent High Throughput models include the series HS-16, HS-20, HS-32 and NHS-35. This is the HS-32 diffusion high throughput vacuum pump. They are the primary industrial standard for high vacuum pumping mechanism. The Agilent Varian HS-32 diffusion pumps have a high pumping speed for all gases and low cost per unit pumping speed when compared with other types of pump used in the same vacuum range. The full fractionating design allows vaporized fluid to be fractionated in the boiler and jet assembly. Contamination and decomposition products are pumped away and only the purest vapor reaches the top jet, assuring highest speed and lowest backstreaming. The vacuum fluid heater is mounted at the bottom of the pump body. The HS pumps have a fill and drain assembly for easy maintenance of pump fluid and continuous monitoring with thermal protection switches. Finned boilers increase the surface area which prolongs fluid life. The inlet is at the top, and the exhaust is through the foreline.Diffusion pumps use a high-speed jet of vapor to direct gas molecules in the pump throat down into the bottom of the pump and out the exhaust. The oil diffusion pump is operated with an oil that has low vapor pressure. Its purpose is to achieve higher vacuum (lower pressure) than possible by use of positive displacement pumps alone. Although its use has been mainly associated within the high vacuum range (down to 10-9 Torr), diffusion pumps today can produce pressures approaching 10-10 Torr when properly used with modern fluids and accessories. The features that make the diffusion pump attractive for high and ultra-high vacuum use are its high pumping speed for all gases and low cost per unit pumping speed when compared with other types of pump used in the same vacuum range. Diffusion pumps cannot discharge directly into the atmosphere, so a mechanical forepump is typically used to maintain an outlet pressure around 1 mTorr. These Varian model HS-32 high vacuum, high throughput diffusion pumps are new and can be ordered with either a 3-phase 240, 415 or 480 VAC heaters. When ordering please specify which voltage your application will require. We stock and sell diffusion pumps oils, along with vacuum fittings, adapters, and replacement parts for your Agilent Varian HS-32 diffusion pumps. This pump uses IVP 704 diffusion pump fluid and is designed for high vacuum and fast pumping of large volumes of gas or vapor in production operations. For HS-32 Instruction Manual scroll down to manuals tab AVAILABLE DOWNLOADS: and download the .pdf. Highlights For This Agilent Varian HS-32 Diffusion Pump ISO 800F Inlet Flange, OD 36.22 in., ID 32.06 in., (24 bolt holes) hole size 0.55 in. ISO 200K Outlet Flange OD 9.45 in., ID 6.73 in., (8-12 claw clamps) Standard Cold Cap Maximum Pumping Speed 17,300 l/s air, 21,625 l/s He and H2 415 VAC @ 4000 Watt Heater (6 required) Weight 1500 lbs. (680Kg) Height 69 in. (1740mm) Designed To Be Used With IVP 704 Diffusion Pump Oil (3 U.S. Gallons)

Condition: New



Part Number: P107056



Price: $40,479.04


Regular Price: $47,622.40




Currency: US Dollar (USD)

Agilent Varian HS-32 Diffusion Pump HALO Baffle Cold Cap, Inlet ISO 800F, 415VAC
Out of Stock


Agilent Varian HS-32 Diffusion Pump With HALO Baffle Cold Cap Inlet flange ISO 800F, Foreline flange ISO 200K, 3 Phase, 415 VAC.Maximum Pumping Speed of 17,300 l/s Air, Agilent Varian These Varian Agilent High Throughput models include the series HS-16, HS-20, HS-32 and NHS-35. This is the HS-32 diffusion high throughput vacuum pump. They are the primary industrial standard for high vacuum pumping mechanism. The Agilent Varian HS-32 diffusion pumps have a high pumping speed for all gases and low cost per unit pumping speed when compared with other types of pump used in the same vacuum range. The full fractionating design allows vaporized fluid to be fractionated in the boiler and jet assembly. Contamination and decomposition products are pumped away and only the purest vapor reaches the top jet, assuring highest speed and lowest backstreaming. The vacuum fluid heater is mounted at the bottom of the pump body. The HS pumps have a fill and drain assembly for easy maintenance of pump fluid and continuous monitoring with thermal protection switches. Finned boilers increase the surface area which prolongs fluid life. The inlet is at the top, and the exhaust is through the foreline. The Halo Baffle stops backstreaming as effectively as an optically dense baffle, yet it retains 60% of the pump’s speed.Diffusion pumps use a high-speed jet of vapor to direct gas molecules in the pump throat down into the bottom of the pump and out the exhaust. The oil diffusion pump is operated with an oil that has low vapor pressure. Its purpose is to achieve higher vacuum (lower pressure) than possible by use of positive displacement pumps alone. Although its use has been mainly associated within the high vacuum range (down to 10-9 Torr), diffusion pumps today can produce pressures approaching 10-10 Torr when properly used with modern fluids and accessories. The features that make the diffusion pump attractive for high and ultra-high vacuum use are its high pumping speed for all gases and low cost per unit pumping speed when compared with other types of pump used in the same vacuum range. Diffusion pumps cannot discharge directly into the atmosphere, so a mechanical forepump is typically used to maintain an outlet pressure around 1 mTorr. These Varian model HS-32 high vacuum, high throughput diffusion pumps are new and can be ordered with either a 3-phase 240, 415 or 480 VAC heaters. When ordering please specify which voltage your application will require. We stock and sell diffusion pumps oils, along with vacuum fittings, adapters, and replacement parts for your Agilent Varian HS-32 diffusion pumps. This pump uses IVP 704 diffusion pump fluid and is designed for high vacuum and fast pumping of large volumes of gas or vapor in production operations. For HS-32 Instruction Manual scroll down to manuals tab AVAILABLE DOWNLOADS: and download the .pdf. Highlights For This Agilent Varian HS-32 Diffusion Pump ISO 800F Inlet Flange, OD 36.22 in., ID 32.06 in., (24 bolt holes) hole size 0.55 in. ISO 200K Outlet Flange OD 9.45 in., ID 6.73 in., (8-12 claw clamps) HALO Baffle Cold Cap Maximum Pumping Speed 17,300 l/s air, 21,625 l/s He and H2 415 VAC @ 4000 Watt Heater (6 required) Weight 1500 lbs. (680Kg) Height 69 in. (1740mm) Designed To Be Used With IVP 704 Diffusion Pump Oil (3 U.S. Gallons)

Condition: New



Part Number: P107059



Price: $42,874.34


Regular Price: $50,440.40




Currency: US Dollar (USD)

Agilent Varian HS-32 Diffusion Pump With Standard Cold Cap, Inlet ISO 800F, 480VAC
Out of Stock


Agilent Varian HS-32 Diffusion Pump With Standard Cold Cap Inlet flange ISO 800F, Foreline flange ISO 200K, 3 Phase, 80 VAC.Maximum Pumping Speed of 17,300 l/s Air, Agilent Varian These Varian Agilent High Throughput models include the series HS-16, HS-20, HS-32 and NHS-35. This is the HS-32 diffusion high throughput vacuum pump. They are the primary industrial standard for high vacuum pumping mechanism. The Agilent Varian HS-32 diffusion pumps have a high pumping speed for all gases and low cost per unit pumping speed when compared with other types of pump used in the same vacuum range. The full fractionating design allows vaporized fluid to be fractionated in the boiler and jet assembly. Contamination and decomposition products are pumped away and only the purest vapor reaches the top jet, assuring highest speed and lowest backstreaming. The vacuum fluid heater is mounted at the bottom of the pump body. The HS pumps have a fill and drain assembly for easy maintenance of pump fluid and continuous monitoring with thermal protection switches. Finned boilers increase the surface area which prolongs fluid life. The inlet is at the top, and the exhaust is through the foreline.Diffusion pumps use a high-speed jet of vapor to direct gas molecules in the pump throat down into the bottom of the pump and out the exhaust. The oil diffusion pump is operated with an oil that has low vapor pressure. Its purpose is to achieve higher vacuum (lower pressure) than possible by use of positive displacement pumps alone. Although its use has been mainly associated within the high vacuum range (down to 10-9 Torr), diffusion pumps today can produce pressures approaching 10-10 Torr when properly used with modern fluids and accessories. The features that make the diffusion pump attractive for high and ultra-high vacuum use are its high pumping speed for all gases and low cost per unit pumping speed when compared with other types of pump used in the same vacuum range. Diffusion pumps cannot discharge directly into the atmosphere, so a mechanical forepump is typically used to maintain an outlet pressure around 1 mTorr. These Varian model HS-32 high vacuum, high throughput diffusion pumps are new and can be ordered with either a 3-phase 240, 415 or 480 VAC heaters. When ordering please specify which voltage your application will require. We stock and sell diffusion pumps oils, along with vacuum fittings, adapters, and replacement parts for your Agilent Varian HS-32 diffusion pumps. This pump uses IVP 704 diffusion pump fluid and is designed for high vacuum and fast pumping of large volumes of gas or vapor in production operations. For HS-32 Instruction Manual scroll down to manuals tab AVAILABLE DOWNLOADS: and download the .pdf. Highlights For This Agilent Varian HS-32 Diffusion Pump ISO 800F Inlet Flange, OD 36.22 in., ID 32.06 in., (24 bolt holes) hole size 0.55 in. ISO 200K Outlet Flange OD 9.45 in., ID 6.73 in., (8-12 claw clamps) Standard Cold Cap Maximum Pumping Speed 17,300 l/s air, 21,625 l/s He and H2 480 VAC @ 4000 Watt Heater (6 required) Weight 1500 lbs. (680Kg) Height 69 in. (1740mm) Designed To Be Used With IVP 704 Diffusion Pump Oil (3 U.S. Gallons)

Condition: New



Part Number: P107057



Price: $40,479.04


Regular Price: $47,622.40




Currency: US Dollar (USD)

Agilent Varian HS-32 Diffusion Pump HALO Baffle Cold Cap, Inlet ISO 800F, 480VAC
Out of Stock


Agilent Varian HS-32 Diffusion Pump With HALO Baffle Cold Cap Inlet flange ISO 800F, Foreline flange ISO 200K, 3 Phase, 480 VAC.Maximum Pumping Speed of 17,300 l/s Air, Agilent Varian These Varian Agilent High Throughput models include the series HS-16, HS-20, HS-32 and NHS-35. This is the HS-32 diffusion high throughput vacuum pump. They are the primary industrial standard for high vacuum pumping mechanism. The Agilent Varian HS-32 diffusion pumps have a high pumping speed for all gases and low cost per unit pumping speed when compared with other types of pump used in the same vacuum range. The full fractionating design allows vaporized fluid to be fractionated in the boiler and jet assembly. Contamination and decomposition products are pumped away and only the purest vapor reaches the top jet, assuring highest speed and lowest backstreaming. The vacuum fluid heater is mounted at the bottom of the pump body. The HS pumps have a fill and drain assembly for easy maintenance of pump fluid and continuous monitoring with thermal protection switches. Finned boilers increase the surface area which prolongs fluid life. The inlet is at the top, and the exhaust is through the foreline. The Halo Baffle stops backstreaming as effectively as an optically dense baffle, yet it retains 60% of the pump’s speed.Diffusion pumps use a high-speed jet of vapor to direct gas molecules in the pump throat down into the bottom of the pump and out the exhaust. The oil diffusion pump is operated with an oil that has low vapor pressure. Its purpose is to achieve higher vacuum (lower pressure) than possible by use of positive displacement pumps alone. Although its use has been mainly associated within the high vacuum range (down to 10-9 Torr), diffusion pumps today can produce pressures approaching 10-10 Torr when properly used with modern fluids and accessories. The features that make the diffusion pump attractive for high and ultra-high vacuum use are its high pumping speed for all gases and low cost per unit pumping speed when compared with other types of pump used in the same vacuum range. Diffusion pumps cannot discharge directly into the atmosphere, so a mechanical forepump is typically used to maintain an outlet pressure around 1 mTorr. These Varian model HS-32 high vacuum, high throughput diffusion pumps are new and can be ordered with either a 3-phase 240, 415 or 480 VAC heaters. When ordering please specify which voltage your application will require. We stock and sell diffusion pumps oils, along with vacuum fittings, adapters, and replacement parts for your Agilent Varian HS-32 diffusion pumps. This pump uses IVP 704 diffusion pump fluid and is designed for high vacuum and fast pumping of large volumes of gas or vapor in production operations. For HS-32 Instruction Manual scroll down to manuals tab AVAILABLE DOWNLOADS: and download the .pdf. Highlights For This Agilent Varian HS-32 Diffusion Pump ISO 800F Inlet Flange, OD 36.22 in., ID 32.06 in., (24 bolt holes) hole size 0.55 in. ISO 200K Outlet Flange OD 9.45 in., ID 6.73 in., (8-12 claw clamps) HALO Baffle Cold Cap Maximum Pumping Speed 17,300 l/s air, 21,625 l/s He and H2 480 VAC @ 4000 Watt Heater (6 required) Weight 1500 lbs. (680Kg) Height 69 in. (1740mm) Designed To Be Used With IVP 704 Diffusion Pump Oil (3 U.S. Gallons)

Condition: New



Part Number: P107060



Price: $42,874.34


Regular Price: $50,440.40




Currency: US Dollar (USD)

Agilent Varian HS-32 Standard Cold Cap Replacement, Diffusion Vacuum Pump Parts, 77252801
Out of Stock


Agilent Varian HS-32 Diffusion Pump Replacement Standard Cold Cap. Agilent Varian PN 77252801. These Agilent Varian HS-32 diffusion pump standard cold caps are a replacement part that can be installed at the customer's location. There are two types of cold caps, standard and Halo Baffle. The type of cold cap used will influence factors, such as, oil backstreaming and final pumping speed of the diffusion pump. For example, the Halo Baffle Cold Cap is an option that fits inside the HS-32 pumps in place of the standard cold cap. The Halo Baffle stops backstreaming as effectively as an optically dense baffle, yet it retains 60% of the pump’s speed. Residual backstreaming is so low that it cannot be measured by the American Vacuum Society’s standard collection method. For location of the cold cap please see item #1 on diagram exploded view & parts illustration shown below. For removal installation procedures of cold cap see page 38 of instruction manual PDF below. These standard cold caps are OEM original Agilent Varian replacement parts with part number 77252801.

Condition: New



Part Number: P107061



Price: $2,310.00



Currency: US Dollar (USD)

Agilent Varian HS-32 Diffusion Pump Jet Assembly with cold cap, PN 76511301
Out of Stock


Agilent Varian HS-32 Jet Assembly with cold cap, Diffusion Pump Replacement Parts Agilent Varian Part Number 76511301 These Agilent Varian HS-32 diffusion pump jet assembly are OEM Agilent Varian replacement parts for the HS-32 diffusion vacuum pumps. This kit includes the complete jet assembly components and cold cap, see the jet assembly referenced on page 40 in instruction manual PDF below. These are original OEM Agilent Varian replacement parts for the HS-32 diffusion pump having part number PN 76511301, see item #3 in the diagram exploded view & parts illustration below.

Condition: New



Part Number: P107075



Price: $23,368.00



Currency: US Dollar (USD)

Agilent Varian HS-32 Diffusion Pump, ASA 32 in. O-Ring Kit, PN K0377167
In Stock
1


Agilent Varian NHS-35, NHS35 in. Inlet Diffusion Pump O-Ring Kit.Agilent Varian PN K0377169 This is the Agilent Varian NHS32, NHS-32 in. (ASA 35 in.) Diffusion Pump O-Ring Kit. O-Ring Kit Contains: 1 Butyl inlet flange O-ring, ASA 32 inch 1 Foreline flange O-ring, ASA 6 inch 8 Viton fill and drain O-rings 4 Viton O-rings 1 Sight glass O-ring 1 Graphite sight glass gasket

Condition: New



Part Number: P107073



Price: $444.44



Currency: US Dollar (USD)

Agilent Varian OEM Butyl O-Ring for Foreline Flange on HS-32 and NHS-35 Diffusion Pumps. Parker, 2-267, PN: 660893267
Out of Stock


Agilent Varian, Butyl O-Ring for Foreline Flange on HS-32 and NHS-35 Diffusion Pumps. Parker, 2-267PN: 660893267 This is an OEM butyl O-ring for the foreline flange on HS-32 and NHS-35 diffusion pumps. Agilent Varian part number: 660893267. We sell other diffusion pump parts and can service your diffusion pump. Please inquire.

Condition: New



Part Number: P1011909



Price: $40.95



Currency: US Dollar (USD)

Agilent Varian HS-32 Water Cooled Halo Baffle Replacement, Diffusion Vacuum Pump Parts, K1856332
Out of Stock


Agilent Varian HS-32 Diffusion Pump Replacement Water Cooled Halo Baffle. Agilent Varian PN K1856332. These Agilent Varian HS-32 diffusion pump water cooled halo baffle are a replacement part that can be installed at the customer's location. There are two types of cold caps, standard and Halo Baffle. The type of cold cap used will influence factors, such as, oil backstreaming and final pumping speed of the diffusion pump. For example, the Halo Baffle Cold Cap is an option that fits inside the HS-32 pumps in place of the standard cold cap. The Halo Baffle stops backstreaming as effectively as an optically dense baffle, yet it retains 60% of the pump’s speed. Residual backstreaming is so low that it cannot be measured by the American Vacuum Society’s standard collection method. For location of the cold cap please see item #1 on diagram exploded view & parts illustration shown below. For removal installation procedures of cold cap see page 38 of instruction manual PDF below. These halo baffles are OEM original Agilent Varian replacement parts with part number K1856332.

Condition: New



Part Number: P107077



Price: $5,128.00



Currency: US Dollar (USD)

Agilent Varian HS-32 Diffusion Pump, ISO 200K Outlet Foreline O-Ring, PN IC200SV
In Stock
1


Agilent Varian HS-32, HS32 Diffusion Pump, ISO 200K Outlet Foreline O-ring. Agient Varian PN IC200SV This is the Agilent Varian HS-32 Diffusion Pump, ISO 200K Outlet Foreline O-Ring.

Condition: New



Part Number: P107070



Price: $229.46



Currency: US Dollar (USD)

Agilent Varian HS-32 Oil Drain Plug, Diffusion Vacuum Pump Replacement Parts, PN 77261001
In Stock
4


Agilent Varian HS-32 Oil Drain Plug, Diffusion Vacuum Pump Replacement Parts Agilent Varian Part Number PN 77261001 This is a replacement Oil Drain Plug. Fits the Agilent Varian HS-32 Diffusion Pump. For location of the oil drain plug see figure #7 (diagram exploded view & parts illustration) below.

Condition: New



Part Number: P107079



Price: $95.94



Currency: US Dollar (USD)

Agilent Varian HS-32 Diffusion Pump Oil Sight Glass Service Kit, Replacement Part PN F6097301
In Stock
3


Agilent Varian HS-32 Oil Sight Glass Service Kit, Diffusion Vacuum Pump Replacement Parts Agilent Varian Part Number PN F6097301. This is a replacement Oil Sight Glass Service Kit. Fits the Agilent Varian HS-32 Diffusion Pump. For location of the sight glass kit see item #6 on (diagram exploded view & parts illustration) below. For pumps built before OCT. 1995.

Condition: New



Part Number: P107081



Price: $453.72



Currency: US Dollar (USD)

Agilent Varian HS-32 Oil Sight Glass Serv. Kit, Diffusion Vacuum Pump Replacement Parts PN L9223001
In Stock
3


Agilent Varian HS-32 Oil Sight Glass, Diffusion Vacuum Pump Replacement Parts Agilent Varian Part Number PN L9223001 This is a replacement Oil Sight Glass. Fits the Agilent Varian NHS-32 Diffusion Pump. For location of the sight glass kit see item #7 on (diagram exploded view & parts illustration) below. For pumps built after OCT. 1995.

Condition: New



Part Number: P107083



Price: $368.19



Currency: US Dollar (USD)

Agilent Varian HS-20, HS-32, HS-35 Oil Sight Graphite Gasket Diffusion Vacuum Pump Replacement Parts, PN: L9228001
In Stock
8
Expecting 12
Anticipated Arrival 12 on 2024-04-28


Agilent Varian HS-20, HS-32, HS-35 Oil Sight Graphite Gasket Diffusion Vacuum Pump Replacement Parts PN: L9228001 This is an Agilent Varian replacement graphite gasket for the oil sight glass on HS-20, HS-32, and HS35 diffusion pumps. For location of the sight glass on the pump see item #7 on (diagram exploded view & parts illustration) below. For pumps built after OCT. 1995.

Condition: New



Part Number: P1011574



Price: $84.40



Currency: US Dollar (USD)

Agilent Varian HS-32 Diffusion Pump, ISO 800F Inlet O-Ring, PN L9165001
In Stock
1


Agilent Varian HS-32, HS32 Diffusion Pump, ISO 800F Inlet O-ring.Agient Varian PN L9165001 This is the Agilent Varian HS-32 Diffusion Pump, ISO 800F Inlet O-Ring.

Condition: New



Part Number: P107069



Price: $306.41




Currency: US Dollar (USD)

Agilent Varian HS-32 Diffusion Pump Dalton Heater Wire 10 AWG, pre-cut 196 in., PN X3900-68003
Out of Stock


Agilent Varian HS-32 Heater Nickle Wire 10 AWG, pre-cut 196 inches long, Diffusion Vacuum Pump Replacement Parts Agilent Varian Part Number PN X3900-68003 This is a replacement heater nickle wire, 10 AWG, 196 inches long. Fits the Agilent Varian HS-32 Diffusion Pump. For location of the heater wire see figure #11 (diagram exploded view & parts illustration) below.

Condition: New



Part Number: P107078



Price: $659.87



Currency: US Dollar (USD)

Agilent Varian HS-32 Diffusion Pump, Replacement Clamping Plate
In Stock
1


Agilent Varian HS-32 Diffusion Pump, Replacement Clamping Plate (6 required per pump) This is a replacement clamping plate. (1 each) Fits the Agilent Varian HS-32 Diffusion Pump. 6 required per pump. For location of the clamping plate see item #14 (diagram exploded view & parts illustration) below.

Condition: New



Part Number: P107062



Price: $460.71



Currency: US Dollar (USD)

Agilent Varian HS-32 Diffusion Pump, Replacement Crush Plate, K7246001
In Stock
1


Agilent Varian HS-32 Diffusion Pump, Replacement Crush Plate Agilent Varian Part Number PN K7246001 (Should be replaced when heater is replaced) This is a replacement crush plate.(1 each) Fits the Agilent Varian HS-32 Diffusion Pump. Should be replaced when heater is replaced. For location of the crush plate see item #13 (diagram exploded view & parts illustration) below.

Condition: New



Part Number: P107063



Price: $212.15



Currency: US Dollar (USD)

Agilent Varian HS-32 Diffusion Pump, Heater Insulation Blanket, 1 Piece, 75792001
In Stock
1


Agilent Varian HS-32 Diffusion Pump, Heater Insulation Blanket, 1 Piece Agilent Varian Part Number PN 75792001 This is a replacement heater insulation blanket. Fits the Agilent Varian HS-32 Diffusion Pump. 1 Cerablanket, 0.50 inch thick. For location of the insulation blanket see item #13 (diagram exploded view & parts illustration) below.

Condition: New



Part Number: P107064



Price: $281.31



Currency: US Dollar (USD)

Agilent Varian HS-32 Lower Boiler Thermal Switch, Diffusion Vacuum Pump Replacement Parts, K9050004
In Stock
1


Agilent Varian HS-32 Lower Thermal Switch, Diffusion Vacuum Pump Replacement Parts Agilent Varian Part Number PN K9050004 This is a replacement lower thermal (boiler) switch. Fits the Agilent Varian HS-32 Diffusion Pump. Set at 550º F, 288º C. For location of the lower thermal switch see figure #9 (diagram exploded view & parts illustration) below.

Condition: New



Part Number: P107071



Price: $257.21



Currency: US Dollar (USD)

Agilent Varian HS-32 Upper Thermal Switch, Diffusion Vacuum Pump Replacement Parts, K9050003
Out of Stock


Agilent Varian HS-32 Upper Thermal Switch, Diffusion Vacuum Pump Replacement Parts Agilent Varian Part Number PN K9050003 This is a replacement lower thermal switch. Fits the Agilent Varian HS-32 Diffusion Pump. Set at 220º F, 104º C. For location of the lower thermal switch see figure #9 (diagram exploded view & parts illustration) below.

Condition: New



Part Number: P107072



Price: $257.21



Currency: US Dollar (USD)

Agilent Varian HS-32 Diffusion Pump, Heater Cover Plate, PN 75791001
Out of Stock


Agilent Varian HS-32 Diffusion Pump, Heater Cover Plate. Agilent Varian Part Number PN 75791001 This is a replacement heater cover plate. Fits the Agilent Varian HS-32 Diffusion Pump. For location of the heater cover plate see item #16 (diagram exploded view & parts illustration) below.

Condition: New



Part Number: P107074



Price: $383.89



Currency: US Dollar (USD)

Agilent Varian HS-32 Diffusion Pump Thermal Switch Block, Brass, F6253001
Out of Stock


Agilent Varian HS-32 Thermal Switch Block Brass, Diffusion Vacuum Pump Replacement Parts Agilent Varian Part Number PN F6253001 This is a replacement thermal switch block made of brass. Fits the Agilent Varian HS-32 Diffusion Pump. See illustration #10 below for location.

Condition: New



Part Number: P107076



Price: $708.13



Currency: US Dollar (USD)

Agilent Varian HS-32 Diffusion Pump, Heater With Leads, 200V, 4000W, 647332020
Out of Stock


Agilent Varian HS-32 Diffusion Pump, Heater Element with leads, 200 Vac, 4000 Watts Agilent Varian Part Number PN 647332020 This is a replacement diffusion pump heater element with leads, 4000W, 200V, for HS-32 Diffusion Pumps.

Condition: New



Part Number: P107082



Price: $729.44



Currency: US Dollar (USD)

Agilent Varian HS-32 Diffusion Pump, Heater With Leads, 240/415/480V, 4000W, 647332010
In Stock
1


Agilent Varian HS-32 Diffusion Pump, Heater Element with leads, 240/415/480 Vac, 4000 Watts Agilent Varian Part Number PN 647332010 This is a replacement diffusion pump heater element with leads, 4000W, 240V/415V/480V, for HS-32 Diffusion Pumps.

Condition: New



Part Number: P107080



Price: $878.75



Currency: US Dollar (USD)

Agilent Varian HS-32 Diffusion Pump, Heater Retrofit Kit, 240/400/440 VAC, 4000W, L6517308
Out of Stock


Agilent Varian HS-32 Diffusion Pump, 240/400/440 VAC Heater Retrofit Kit, 4000 Watts Agilent Varian Part Number PN L6517308 This is the HS-32 Diffusion Pump 240/400/440 VAC Heater Retrofit Kit. Fits the Agilent Varian HS-32 Diffusion Pump. (for pumps built before May 1990) Clamping plates not included.

Condition: New



Part Number: P107065



Price: $4,900.00



Currency: US Dollar (USD)

Agilent Varian NHS-32 Diffusion Pump, Heater Retrofit Kit, 415 VAC, 4000W, L6517326
Out of Stock


Agilent Varian HS-32 Diffusion Pump, 415 VAC Heater Retrofit Kit, 4000 Watts Agilent Varian Part Number PN L6517326 This is the HS-32 Diffusion Pump 415 VAC Heater Retrofit Kit. Fits the Agilent Varian HS-32 Diffusion Pump. (for pumps built before May 1990) Clamping plates not included.

Condition: New



Part Number: P107066



Price: $4,900.00



Currency: US Dollar (USD)

Agilent Varian HS-32 Diffusion Pump, Heater Retrofit Kit, 480 VAC, 4000W, L6517309
Out of Stock


Agilent Varian NHS-32 Diffusion Pump, 480 VAC Heater Retrofit Kit, 4000 Watts Agilent Varian Part Number PN L6517309 This is the HS-32 Diffusion Pump 480 VAC Heater Retrofit Kit. Fits the Agilent Varian HS-32 Diffusion Pump. (for pumps built before May 1990) Clamping plates not included.

Condition: New



Part Number: P107067



Price: $4,900.00



Currency: US Dollar (USD)

Agilent Varian HS-32 Diffusion Pump, Heater no Leads, (before May 90) 240/415/480V, 4000W, 647332075
In Stock
1


Agilent Varian HS-32 Diffusion Pump, Heater Element no leads, 240/415/480 Vac, 4000 Watts Agilent Varian Part Number PN 647332075 This is a replacement diffusion pump heater element no leads, for HS32 Diffusion Pump, 4000W, 240V/415V/480V, used on pumps built before May '90 (six heaters required per pump) One heater consists of 2-120V heaters, right and left.

Condition: New



Part Number: P107068



Price: $872.50



Currency: US Dollar (USD)

Agilent Varian Bolts to Attach ASA Gate Valves to ASA Diffusion Pumps 3/4-10 1-1/4" Length Hex Bolt - 1 each
In Stock
14


Agilent Varian Bolts to Attach ASA Gate Valves to ASA Diffusion Pumps 3/4-10 1-1/4" Length Hex Bolt - Course Thread, 1 each. These are bolts to attach ASA Gate Valves to ASA Diffusion pumps, ASA sizes 6, 8 and 10 inch. One each, size 3/4-10 1-1/4" Length Hex Bolt - Course Thread.

Condition: New



Part Number: P1011551



Price: $5.01




Currency: US Dollar (USD)
Marca de agua con el logotipo de Ideal Vacuum
CONTACT US
Ideal Vacuum Products , LLC
5910 Midway Park Blvd NE
Albuquerque, New Mexico 87109-5805 USA

Phone: (505) 872-0037
Fax: (505) 872-9001
info@idealvac.com