|
Agilent Varian VHS-4 ISO160, Water Cooled Diffusion Pump, 9 in.OD, Std. Cold Cap 120V 1450W L6256301 |
|
|
|
|
Agilent Varian VHS-4 Water Cooled Vacuum Diffusion Pump, ISO 160K Inlet Flange, 9 inch OD, Maximum Pumping Speed 1200 l/s
Standard Cold Cap, 120 VAC 1450 Watt Heater, Agilent Varian Part Number L6256301
The Agilent Varian VHS-4 has been designed to fill a special need in applications where high pumping speeds are required and space limitations demand a compact pump. This VHS-4 is the smallest of the VHS series pumps being well suited for laboratory and research use. The VHS-4 pump is a rugged, general-purpose unit with an operating range of 2 x 10-3 to <5 x 10-9 Torr. The Agilent Varian VHS-4 is ideal for applications requiring fast cycling because of its high pumping speed (maximum rated at 1200 l/s) air combined with high forepressure tolerance (0.65 Torr with no-load and 0.55 Torr when at full gas load). Backstreaming rate of the unit is 1x10-4 mg/cm 2/ min, without the use of any cooled cold cap.
This Agilent Varian VHS-4 Diffusion Pump Includes:
- IS0 160K Inlet Flange (No bolt holes, attached with 4 to 8 claw clamps)
- KF40 Outlet Flange
- Standard Cold Cap
- 1200 l/s Maximum Pumping Speed Air
- 120 VAC @ 1450 Watt Heater
- 4 Water Connections 3/8 in. FPT Pipe, 1/8 Barbed
- Ceramic Bushing
- Centering ring for ISO foreline flange, KF40
- Installation and Operation Manual
- Designed To Be Used With Santovac 5 Diffusion Pump Oil
Diffusion pumps use a high-speed jet of vapor to direct gas molecules in the pump throat down into the bottom of the pump and out the outlet. The oil diffusion pump is operated with an oil that has low vapor pressure (Santovac 5 oil)). Its purpose is to achieve higher vacuum (lower pressure) than possible by use of positive displacement pumps alone. The Agilent Varian VHS-4 can pump down to pressures of <5x10-9 Torr. Diffusion pumps cannot discharge directly into the atmosphere, so a mechanical forepump, roughing pump is typically used to maintain an outlet pressure around 1 mTorr.
These Agilent Varian Diffusion Pumps are very reliable, simple in design and operate with no noise or vibration. Diffusion pumps are still the
most economical means for creating high-vacuum pressures. Diffusion pumps also tolerate operating conditions such as excess particles and reactive gases that
would destroy other types of high-vacuum pumps. They can be ordered with a 1-phase 115, 208, 240 VAC heater harness and with standard or extended cold cap. We stock and sell Santovac 5 diffusion pump fluids for this pump. Please see below in our “Related” section for additional accessories that may benefit your vacuum applications and maintenance needs. We offer a large variety of vacuum greases, oils, vacuum fittings, hoses, vacuum gauges, sensors/transducers, parts and accessories sold separately on this website.
These Agilent Varian VHS-4 diffusion pumps have ISO 160K inlet flange, operate on 1-phase 120 VAC, standard cold cap and has Agilent Varian part number L6256301. The Agilent Varian VHS-4 diffusion pump user's instruction manuals can be downloaded in PDF format below. These are typical stock items that often ship same day as order is placed.
|
|
|
|
ITEM |
DESCRIPTION |
PART NO. |
1 |
Standard Cold Cap Assembly |
86488301 |
2 |
Extended Cold Cap Assembly |
F6898301 |
3 |
Sight Glass Repair Kit consisting of:
Sight Glass | L8816001 |
Gasket, Teflon | L9694001 |
O-ring, Viton, Parker No. 2-113 | ComI |
O-ring, Viton, Parker No. 2-226 | ComI |
|
L8908301 |
4 |
Jet Assembly |
F4785301 |
5 |
Splash Baffle |
F4780301 |
6 |
Foreline Baffle Assembly |
86754301 |
7 |
Thermal Switch Includes:
Switch (set at 300 °F – 147 °C) | 642906025 |
7a Lug | 648056680 |
Wire | 656179100 |
Box Insulator | 89867001 |
|
L8912301 |
8 |
Heaters (one heater required per pump)
120 V / 1450 watt Heater Element | 647304205 |
208 V / 1450 watt Heater Element | 647304210 |
240 V / 1450 watt Heater Element | 647304250 |
|
|
9 |
VHS-4 heater wire, 10 AWG, 24 inches (3 per pump required) |
X3901-68001 |
10 |
Lugs, Replacement, nickel |
648056680 |
11 |
Heater Clamp |
88164301 |
12 |
Heater Insulation |
88164301 |
13 |
Baffle Retaining Ring |
699992156 |
14 |
O-Ring Kit includes:
3 Butyl inlet flange O-ring, Parker No. 2-258 |
10 Viton fill and drain O-rings (old style), Parker No. 2-112 |
10 Viton fill and drain O-rings (new style, Parker No. 2-113 |
1 Sight glass O-ring, Parker No. 2-226 |
1 PTFE gasket |
|
K0377183 |
15 |
Screw, Rd hd machine, no. 8-32x31/416, stainless steel |
Screw |
16 |
Stud, no. 8-32 x 1/2, stainless steel |
Stud |
17 |
Screw, Socket hd cap, no. 8-32x11/44, stainless steel |
Screw |
18 |
Centering ring for ISO inlet flange, 160K |
IC160SV |
19 |
Centering ring for ISO foreline flange, KF40 |
KC40SV |
|
Santovac 5 diffusion pump fluid, 500 cc |
695405005 |
|
Installation and Operation Manual-download from www.agilent.com/chem/vacuum |
699901021 |
|
|
|
|
|
|
|
|
Product: |
Agilent Varian VHS-4 ISO160, Water Cooled Diffusion Pump, 9 in.OD, Std. Cold Cap 120V 1450W L6256301 |
Condition: |
New |
Warranty: |
Full Manufacturer's Warranty |
Part Number: |
P106772 |
Sale Price: |
$6,589.80
Regular Price: $7,322.00
|
|
|
|
|